interface/ethernet/poe/monitor
Syscap: (poe or poe-in) Type: Command
<ArgTableRow arg="name" typ="string"></ArgTableRow> <ArgTableRow arg="poe-out" typ="enum (off | auto-on | forced-on | forced-on-a | forced-on-bt) { off:0, auto-on:1, forced-on:2, forced-on-a:3, forced-on-bt:4 }" syscap="poe"></ArgTableRow> <ArgTableRow arg="poe-voltage" typ="enum (auto | low | high) { auto:0, low:1, high:2 }" syscap="poe">PoE out voltage selection</ArgTableRow> <ArgTableRow arg="poe-out-status" typ="enum (disabled | waiting-for-load | powered-on | overload | short-circuit | voltage-too-low | current-too-low | power-cycle | voltage-too-high | controller-error | controller-upgrade | voltage-on-poe-in | no-valid-PSU | controller-init | low-voltage-too-low | lldp-power-off) { disabled:1, waiting-for-load:2, powered-on:3, overload:4, short-circuit:5, voltage-too-low:6, current-too-low:7, power-cycle:8, voltage-too-high:9, controller-error:10, controller-upgrade:11, voltage-on-poe-in:12, no-valid-PSU:13, controller-init:14, low-voltage-too-low:15, lldp-power-off:16 }"></ArgTableRow> <ArgTableRow arg="poe-out-voltage" typ="num"></ArgTableRow> <ArgTableRow arg="poe-out-current" typ="num"></ArgTableRow> <ArgTableRow arg="poe-out-power" typ="num"></ArgTableRow> <ArgTableRow arg="poe-out-power-pair" typ="enum (b | a | bt) { b:0, a:1, bt:2 }"></ArgTableRow> <ArgTableRow arg="power-cycle-host-alive" typ="bool"></ArgTableRow> <ArgTableRow arg="power-cycle-after" typ="time"></ArgTableRow>